Hardware/Misc.

Home > Hardware/Misc.

We found 48 results matching your criteria.

Find by Pricing

Choose a sub category:

Air filters	Electric Starters	Catch can
Chain breakers	Clevis	Fuel Tanks / Line / Filters
Hopper stopper	Rod ends	Reusable cotter pins
Wheel Nuts / Studs

Sort By:

Page of 2


Seat Grommets : $1.00	Pulse fitting : $3.00	90 Degree Elbow Fitting : $3.00

Seat mounting grommets	Pulse Inlet Fitting FMS uses these fittings to install in the Clone's Valve Cover in order to Pulse the Fuel Pump. Use 1/8th pipe tap. We sell the Valve Cover with the fitting already installed as well.	90 Degree Elbow 1/8" npt


Foam pre-filter : $4.00	Fuel Filter : $4.00	Throttle cable 72" : $4.00

Foam Pre Filter 3.5" X 5"	* Hi-flow inline fuel filter	72" Throttle cable with 3/16" ball on one end.


Keystock 1/4'' : $5.00	Chain break replacement pin : $5.00	Reusable cotter pins : $5.00

1/4" x 1/4" x 8" steel keystock.	Replacement pin for chain break	Reusable cotter pins available in small or large size. These come in a 10 pak. The large ones are what is in the front spindles to hold on hubs.


Engine Throttle Clevis : $5.00	Wheel Nuts 7/16" Head American Made : $5.00	Aluminum Throttle / Brake Clevis : $6.00

Aluminum clevis fits clone or flathead.	* 12 Wheel Nuts 1/4"-28 (smooth) * Plated 7/16"" Head * Great For Wheels and Sprocket	Black Anodized throttle /brake clevis for 1/4-28 thread


Carb Cover : $6.00	Muffler Cover : $6.00	Fuel Petcock Valve : $6.00

Fits clone or flathead	* Cover your Muffler when you are not racing and keep the dirt out. * Fits Rlv-B91 Muffler	G- MAN FUEL TANK PETCOCK /CATCH CAN. PLASTIC 1/8" npt


1 1/4 Black axle collar : $7.00	1 1/4 axle collar : $7.00	Replacement locking pin : $7.00

1 1/4 Black split aluminum set collar. Put one on each side of bearing to keep axle from moving. Also against rear hub to prevent slippage	1 1/4 split aluminum set collar. Put one on each side of bearing to keep axle from moving. Also against rear hub to prevent slippage	Replacement steering lock pin 1/8" Dia.


3/8" Rod Ends Male : $7.00	Wheel Nuts 1/2" Head : $7.00	Snake skin header sleeve : $8.00

Hole diameter 3/8" Thread pitch 3/8"-24 Male thread LH or RH Steel	Made in the U.S.A. * 12 Wheel Nuts 1/4"-28 (smooth) * Black 1/2" Head * Great For Wheels and Sprocket	Header sleeve slides tight over pipe. Keeps pipe cooler on outside and the heat in for more horsepower. Price is for 2 ft. which will do most any pipe. (pipe not included)


Muffler clamp : $8.00	Valve breather kit : $9.00	Ratio Rite measuring cup : $10.00

Stainless steel muffler clamp. Fits the RLV #4104 and #4106 muffler.	Clone valve breather kit. Fits tight in valve cover. Has outlet to attach tubing from valve cover to catch can.	Great for oil measuring


Klotz filter spray : $12.00	K&N style air filter : $12.00	Restrictor plates clone : $12.00

Filter and foam spray		Jr class restrictors


Tygothane Fuel Line (Best) : $15.00	1/2" Camber Heim Joint Assembly : $15.00	Outerwears pre-filter : $15.00

* Will not shrink and harden * 1/4" Inside Diameter * Fuel resistant gas or Alcohol * 5 ft. length	(1) 1/2 Heim (drilled for safety pin) (1) safety pin (1) 1/2 nut (1) 1/2 castle nut (6) washers	Fits K&N style air filter